We have a variety of sizes of tank trucks and trailers. Our tandem tank trucks have single compartment tanks, while our tri-drive tank trucks have two separate compartments. With these trucks, along with pups and quads, we are able to haul up to 50 cubic metres of fluid at one time, depending on the type and weight of the fluid. All of our tank trucks have 1-2 cubic metre spill-resistant gear pumps and are available with clean or dirty tanks. These trucks are perfect for fracs, delivering or transferring any kind of fluid or as a catch truck for pigging pipelines. Sour sealed units are also available, some with an H2S scrubber built right in to it for cleaning and hauling sour fluid.


We have a variety of different sizes of pressure trucks. All are capable of pressuring up to 5000 PSI (with some capable of up to 15,000 PSI), and can pump any kind of fluid, including acid.
Our large pressure trucks are tri-drive units with two compartments, with a total capacity of 10 m3. It can pump up to 550 L/min and is suited for batching, injectivity tests, cleaning tanks and flare stacks, coil tubing jobs, drill outs, or any pressure work that requires a higher volume of fluid.

Our medium pressure trucks are three-tonne units with three compartments capable of holding up to 6m3. They can pump up to 150 L/min and are mainly used for pigging lines, batching, and filling and pressuring pipelines.

Our small pressure trucks are one-tonne units with two compartments. Maximum capacity in these units is 3.5m3 with a pump rate of 150 L/min. They are best suited for batching, downhole pressure testing, isolation packer tests, flowline inhibition and bumping up lines.


Our hot oilers are tri-drive and tandem units with four-compartment tanks. The rear tank is used to store fuel for the burner, so the total capacity of usable space is up to 10m3. Each unit has a 5.5 Million BTU burner for heating and is able to pressure up to 15,000 PSI and can pump up to 750 L/min. They are all able to haul and pump acid as well. These units are ideal for thawing frozen/near frozen lines, hot oiling and circulating wells, rod strings and coil tubing, wax removal or heating water on site for fracs, bulk washes and flare stacks.


Our vacuum truck/combo unit has one compartment with a 10m3 capacity. It has a pressure limit of up to 3000 PSI and a capacity of up to 7m3 for solids. It can suck up spills, empty drums, barrels or tanks, and clean up and haul away disposal fluid and chemicals. The hydro-vac component is ideal for thawing valves and well heads, steam cleaning and exposing in-ground pipelines.

Other Equipment

Gravel Truck: Tandem truck, capable of hauling 10 yards/tonnes of gravel or sand in one load.

Winch Truck: Tandem tractor suitable for hauling flat decks, scissor-necks and superbees.

Mobile H2S Scrubber Unit: Hauled behind a tank truck or the vacuum truck and filled with H2S scavenger, used to pump through and scrub sour fluids.